The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.The docking and undocking process is simple:Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included).This holder provides a reliable charging solution for various applications.Product features RAM Mounts RAM-GDS-DOCK-U3CPU:Only compatible with IntelliSkin and Rear Pogo-PadsSnap-In functionEasy insertion and removalCharging functionInput Connector: USB-CPower Output: 60W maxOutput voltage: 5 - 20V @ 3A maxInput Cable Length: ca. 800 mmWeight: ca. 150 gAdditional information: The Lever Stop included with this dock is required in order to function properly.Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-U3CPU holder is supplied.
The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.The docking and undocking process is simple:Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included).This holder provides a reliable charging solution for various applications.Product features RAM Mounts RAM-GDS-DOCK-U3CPU:Only compatible with IntelliSkin and Rear Pogo-PadsSnap-In functionEasy insertion and removalCharging functionInput Connector: USB-CPower Output: 60W maxOutput voltage: 5 - 20V @ 3A maxInput Cable Length: ca. 800 mmWeight: ca. 150 gAdditional information: The Lever Stop included with this dock is required in order to function properly.Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-U3CPU holder is supplied.
RAM Mounts GDS Uni-Conn Powered Snap-In Dock - 2-Hole AMPS Pattern - RJ45 Connector - PoE to PD Charging Modul - Screw Set
The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.The docking and undocking process is simple:Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included).This holder provides a reliable charging solution for various applications.Product features RAM Mounts RAM-GDS-DOCK-U3EU:Only compatible with IntelliSkin Thin-Case and Rear Pogo-PadsSnap-In functionEasy insertion and removalCharging functionInput Connector: JST / RJ45 (Ethernet) ConnectorPower Output: 20W maxOutput Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @1.67AInput Cable Length: ca. 800 mmIncludes PoE to PD Charging ModuleWeight: ca. 226 gAdditional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-U3EU holder is supplied.
GDS® Uni-Conn™ Powered PoE Dock with Release Button
The GDS® Uni-Conn™ Powered PoE Dock with Release Button (RAM-GDS-DOCK-U5EU) is a versatile, quick-release docking solution for devices enclosed in an IntelliSkin® with rear pogo pads. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via the JST connector and PoE Adapter. It features an easy docking and undocking process; simply place the IntelliSkin®-wrapped device into the base of the dock and push it to snap into place.This dock features a 2-hole AMPS pattern, allowing it to be integrated into the RAM® ball and socket mounting system with a RAM® Diamond or Round Ball Base. The snap-in attachment method makes this dock ideal for rugged environments, including vehicles. One Dock to Connect Them All™ Always Protected. Always Connected.®FeaturesQuick-release dock featuring GDS® Technology™ uses an integrated pogo pin connector to provide high-speed chargingDesigned for devices enclosed in IntelliSkin® with Rear Pogo PadsJST connector enables high-speed charging capabilitiesRAM® Compatible™; complete your solution with a diamond ball adapter, arm, and base of choiceHole pattern - 2-Hole AMPS 1.912-inchMaterials - High strength compositeOutput voltage - USB PD 3.0: 5V @ 3A, 9V @ 2.2A, 12V @ 1.67APower Output - 20W maxInput connector - JST ConnectorInput cable length - 800 mmAdditional Information - GDS® Uni-Conn™ Snap-In docks are not recommended for open cockpit applications, such as forklifts.
RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set
The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Left) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.The docking and undocking process is simple:Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included).This holder provides a reliable charging solution for various applications.Product features RAM Mounts RAM-GDS-DOCKLL-U3CPU:Only compatible with IntelliSkin and Rear Pogo-PadsSnap-In functionKey-LockingEasy insertion and removalCharging functionInput Connector: USB-CPower Output: 60W maxOutput voltage: 5 - 20V @ 3A maxInput Cable Length: ca. 800 mmWeight: ca. 150 gAdditional information: The Lever Stop included with this dock is required in order to function properly.Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLL-U3CPU holder is supplied.
RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set
The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Rechts) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads.This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection.The docking and undocking process is simple:Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place.To remove it, simply press the lever to release the tablet.The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included).This holder provides a reliable charging solution for various applications.Product features RAM Mounts RAM-GDS-DOCKLR-U3CPU:Only compatible with IntelliSkin and Rear Pogo-PadsSnap-In functionKey-LockingEasy insertion and removalCharging functionInput Connector: USB-CPower Output: 60W maxOutput voltage: 5 - 20V @ 3A maxInput Cable Length: ca. 800 mmWeight: ca. 150 gAdditional information: The Lever Stop included with this dock is required in order to function properly.Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKLR-U3CPU holder is supplied.
RAM Mounts Strom-Modul PoE zu Power Delivery - VESA 75x75 mm - JST-/RJ45 Schnittstellen
The RAM® PoE to Power Delivery Module with VESA & Pedestal Hole Patterns (RAM-GDS-CHARGE-POE-PD-VESAU) is an external module that adapts a male JST connector and male RJ45 connector, enabling Power-over-Ethernet for any technology with an integrated male JST connector.The 75x75mm VESA hole pattern allows you to sandwich this module between a device or device holder and mounting solution for a sleek composition. It also includes an RJ45 port cover to protect the unused port from debris.FeaturesEnables Power over Ethernet via male JST & RJ45 connectors75x75mm VESA & GDS® Uni-Conn™ Pedestal Dock hole patternsIncludes RJ45 port cover for debris protectionHole pattern - 75x75 mm VESA, 2.625-inch x 2.625-inchPorts - JST 2x3 Female, RJ45 Female
